Community and social housing
Community and social housing providers build to fixed budgets and maintain their homes for decades. Coreline provides structural and civil engineering for new community housing and assessment of existing stock, with an emphasis on repeatable designs and details that are durable and cheap to maintain.
Sector
Projects in this sector
- Community housing
- Social housing
- Small subdivisions and infill housing
What clients in this sector worry about
- Whole-of-life cost
- The provider owns the maintenance bill. Durable details and drainage that keeps water away from footings matter more than shaving a little off the build cost.
- Repeatable designs across many sites
- A standard dwelling design used across several lots still needs footings matched to each site's classification, slope and drainage.
- Upgrading existing stock
- Older homes may need structural assessment before modifications for accessibility, extensions or repairs after storm or termite damage.
Engineering considerations
- Site-specific footings for standard designs
- A typical house plan can sit on Class A sand at one site and highly reactive clay at another. Footings are designed for each site's classification under AS 2870.
- Accessible and adaptable housing
- Step-free entries, wider paths and reinforced walls for future grab rails are easier to build in than to retrofit. Queensland applies the NCC 2022 livable housing provisions to new homes.
- Durability in coastal and humid climates
- Corrosion protection for steel, timber durability class and concrete cover are chosen for the site's exposure, which ranges from inland to near-coastal across South East Queensland.
- Small lot and infill subdivisions
- Infill sites bring sewer mains, retaining against neighbours and stormwater discharge constraints that need civil and structural design together.
Questions we are asked
Can one standard house design be used on every lot?
The house plan can be standard, but the footings cannot. Each lot needs a site classification and a footing design that suits its soil, slope and drainage.
What does a structural assessment of an existing house look at?
Footings and subfloor, wall and roof framing, tie-downs, signs of movement or termite damage, and any alterations, with recommendations ranked by safety and urgency.
Do new homes in Queensland have to meet livable housing requirements?
Queensland adopted the livable housing provisions of NCC 2022 for new houses and apartments. The certifier confirms which provisions apply to a specific project.
Sources
Have a project that needs engineering input?
Tell us what you are building or assessing, where it is and what drawings or reports you already have. We will come back with questions, a scope and a fee.
- Phone
- 1300 924 666
- Registered engineer
- Mustafa Koc, RPEQ 35981 (Civil)
