Skip to content
Coreline Engineering

Residential engineering inspections

We inspect footings, slab reinforcement and framing during construction, and inspect existing houses where cracking, sagging floors or movement needs an engineer's opinion. Inspection reports state what was seen, what it means and what to do next.

Housing engineering

Typical projects

  • Pre-pour slab and footing inspections
  • Frame inspections for engineered elements
  • Cracking and movement in existing houses
  • Defect reports for owners and builders

Problems this work solves

Inspections timed to the pour
Reinforcement must be inspected before concrete is placed. Missing that window can mean expensive testing or rework.
Separating cosmetic from structural
Most cracks in houses are cosmetic, but some point to foundation movement. The inspection has to distinguish them.
Disputes
Defect disputes need clear, impartial reporting with photographs and measurements.

What our engineering covers

Coreline's role is design, documentation, assessment and inspection. Construction, supply and installation sit with the builder and trades.

  • Footing and slab reinforcement inspections
  • Frame and connection inspections for engineered elements
  • Inspection of cracking and movement in existing houses
  • Inspection reports and certificates
  • Remedial recommendations

Design considerations

Booking ahead
Inspections should be booked before the pour date is fixed, so the programme does not wait on the engineer.
Crack measurement
Crack widths and their change over time tell more than a single visit. Monitoring may be recommended.
Who the report is for
A report for a builder's records, an owner or a dispute differs in scope and format.

What you typically receive

The exact deliverables are set in the fee proposal for each project.

  • Monitoring plan where cracking needs tracking over time
  • Inspection certificate
  • Inspection report with photographs
  • Remedial recommendations where defects are found

What to send us

  • Builder or site supervisor contact for the day
  • Approved structural drawings
  • Proposed inspection date
  • Site access details
  • For existing houses: description and photos of the problem

Standards and regulations that usually apply

Which documents govern a design depends on the project. These are the ones most often relevant here; we confirm the applicable editions for each job.

AS 2870
Site classification and the design of slabs and footings for houses, townhouses and similar buildings.
NCC (Building Code of Australia)
Performance requirements for buildings. In Queensland NCC 2022 applies until 30 April 2027 and NCC 2025 from 1 May 2027.

Questions we are asked

When does a slab need an engineer's inspection?

Typically before the concrete pour, once reinforcement, pods and edge beams are in place, so any issues can be fixed before concrete is placed. Your certifier and the drawings state which inspections are required.

Are cracks in my house walls a structural problem?

Most are cosmetic, from shrinkage or minor movement. Cracks that are wide, growing, or come with doors and windows sticking should be inspected by an engineer.

Do you inspect other engineers' designs?

We generally inspect our own designs. For another engineer's design, inspection may be possible with their agreement and the approved drawings.

Sources

Need residential engineering inspections?

Tell us what you are building or assessing, where it is and what drawings or reports you already have. We will come back with questions, a scope and a fee.

Registered engineer
Mustafa Koc, RPEQ 35981 (Civil)
Add company, role and timing (optional)

We use these details only to respond to your enquiry. See our privacy policy. Please do not attach or paste plans here; we will ask for them by email once we have spoken.

Call 1300 924 666Discuss your project