Industrial facilities
Industrial buildings carry the heaviest and least forgiving loads a structural engineer sees: forklift wheels, rack legs, cranes and vibrating plant. Coreline designs industrial structures and slabs, including steel fibre reinforced concrete floors, for warehouses, processing plants, farm buildings and materials handling facilities.
Sector
Projects in this sector
- Industrial buildings
- Industrial infrastructure
- Farm and horticulture buildings
- Processing and manufacturing
- Materials handling
What clients in this sector worry about
- A floor that stays flat and crack-controlled
- Joint damage and curling under forklift traffic are the most common industrial defects. Owners want a slab with fewer joints, predictable cracking and a surface that suits their handling equipment.
- Operational continuity
- Extensions and upgrades often happen next to a running plant. Construction staging, temporary works and shutdown windows shape the engineering as much as the permanent loads do.
- Equipment that may change
- Racking heights, crane capacity and plant layouts change over a building's life. Designing headroom into foundations and frames keeps future options open.
Engineering considerations
- Slab-on-ground design for point loads
- Rack base plates and forklift wheels apply concentrated loads that govern slab thickness. Subgrade preparation, joint layout and reinforcement, whether mesh, bars or steel fibres, are designed together.
- Crane runways and dynamic loads
- Overhead cranes impose vertical, lateral and longitudinal forces with fatigue effects. Runway beams, brackets and the supporting columns are checked for these actions under AS 4100.
- Portal frames and large roofs
- Long-span portal frames are sensitive to wind uplift and to openings such as roller doors left open in a storm. Internal pressure cases and connection design deserve as much attention as member sizing.
- Plant and equipment interfaces
- Machine bases, bunds, pits and conveyor supports need anchor layouts, tolerances and isolation details coordinated with the equipment supplier's data.
- Farm and horticulture buildings
- The NCC includes specific provisions for farm buildings and farm sheds. Packing sheds, machinery sheds and greenhouses still need a structure that suits the site's wind exposure and ground.
Questions we are asked
Is a steel fibre reinforced slab suitable for a warehouse?
Often, yes. Steel fibres can reduce or replace conventional mesh and allow larger joint spacings, but suitability depends on the loads, the subgrade and the finish required, so the slab has to be designed for the specific rack and forklift loads.
What information is needed to design an industrial slab?
Racking layout and leg loads, forklift type and wheel loads, any mezzanine or plant loads, the required floor flatness, and a geotechnical report covering subgrade strength and site classification.
Can an existing shed take a new crane?
Only after a structural check. The columns, footings and frame connections were designed for specific loads, and a crane adds vertical and horizontal forces that the original design may not have allowed for.
Sources
Have a project that needs engineering input?
Tell us what you are building or assessing, where it is and what drawings or reports you already have. We will come back with questions, a scope and a fee.
- Phone
- 1300 924 666
- Registered engineer
- Mustafa Koc, RPEQ 35981 (Civil)
