Aquatic engineering
Coreline provides engineering for swimming pools and aquatic facilities: structural design of the pool shell and its foundations, plant room and hydraulic design, water treatment review, and assessment of existing pools. We work for pool builders, owners, architects and facility operators as the engineering consultant, while the pool contractor builds.
9 services
A pool is a water-retaining concrete structure that sits in the ground, often close to a house footing, a boundary wall or a sewer. The shell design has to deal with soil movement, groundwater uplift when the pool is emptied, and loads from neighbouring structures, and it has to be read alongside the site's soil test. On commercial and hydrotherapy pools the structure is only half the job: filtration, disinfection, heating and circulation decide how much the facility costs to run and how easily the operator can keep water quality within limits.
We design residential pools for pool builders and owners, and we take on the wider engineering of commercial, school, community and hydrotherapy facilities. For existing pools we inspect, investigate leaks and cracking, review plant and water treatment, and set out what has to change to bring an older facility up to current requirements.
Coreline does not build pools, supply equipment or operate facilities. Keeping the engineering independent from supply means plant selection, materials and remedial options are recommended on performance and whole-of-life cost.
Aquatic engineering services
- Commercial pool engineeringEngineering for hotel, school, apartment and community pools: shell structure, plant room, hydraulics and water treatment design in Queensland.
- Residential pool engineeringStructural design and certification of concrete pools for pool builders and owners in Brisbane and south-east Queensland, including sites near houses.
- Hydrotherapy poolsEngineering for hydrotherapy pools in hospitals, aged care, clinics and schools: warm-water treatment, accessible entry, shell structure and plant.
- Aquatic facility assessmentsCondition audits, compliance reviews and asset management advice for existing commercial, school and council pools and aquatic centres in Queensland.
- Aquatic refurbishment and upgradesRemedial design, retrofit to current requirements and upgrades for existing commercial, community and residential pools across south-east Queensland.
- Plant rooms and water treatmentPool plant room layout, energy-efficient hydraulic design and independent review of filtration and disinfection systems for Queensland pools.
- Pool leak investigationEngineering investigation of leaking pools and spas: finding the source in the shell, joints or pipework and designing a repair that lasts.
- Water play and aquatic featuresEngineering for community water play areas, water slides, wet-deck systems and aquatic features: structure, hydraulics and water treatment in Queensland.
- Pool surfaces and finishesEngineering advice on pool tiles, cowlings, adhesives, grouts and surface finishes for new and refurbished pools, so finishes stay bonded and watertight.
Also within this discipline
Work we take on as part of a wider engagement. Ask us if your project needs it.
- Construction-phase inspection of pool reinforcement and set-out before concrete is placed
- Access and inclusion advice for pool entries, ramps and change facilities
Questions we are asked
Does a pool in Queensland need an engineer's design?
An in-ground concrete pool needs a structural design that the building certifier will accept, and that design is normally prepared and signed by an RPEQ. The engineer's drawings are read with the site's soil test, and they set out the shell thickness, reinforcement, founding requirements and details near existing footings or sewers.
Is a pool safety certificate the same as a pool engineering certificate?
No. A pool safety certificate is issued by a QBCC-licensed pool safety inspector and confirms the barrier complies with QDC MP 3.4. Structural engineering certification concerns the pool shell, its foundations and the effect on nearby structures, which MP 3.4 does not cover.
Can you design a pool close to a house or a sewer line?
Yes, but the design has to show the excavation stays outside the load influence zone of the existing footings, or the footings need underpinning first. Near a sewer, water main or stormwater drain, Queensland Development Code MP 1.4 sets the clearances and when the service provider's approval is needed.
Who approves a commercial or hydrotherapy pool?
Public swimming pools, which include commercial, hydrotherapy and shared multi-dwelling pools, need building approval and are subject to Queensland's public pool requirements on top of the structural design. We prepare the engineering that those approvals rely on and coordinate with the certifier and the operator's water quality requirements.
Have a project that needs engineering input?
Tell us what you are building or assessing, where it is and what drawings or reports you already have. We will come back with questions, a scope and a fee.
- Phone
- 1300 924 666
- Registered engineer
- Mustafa Koc, RPEQ 35981 (Civil)
