Health and community facilities
Health and community buildings have to keep serving the public while they are extended or refurbished. Coreline provides structural design and assessment for clinics, medical centres, community halls and public buildings, with attention to equipment loads, vibration and staged works in occupied facilities.
Sector
Projects in this sector
- Health facilities
- Medical centres and clinics
- Public buildings
- Community halls
What clients in this sector worry about
- Keeping the facility open
- A clinic or hall usually cannot close for a year. Works are staged around patient or public areas, which affects temporary propping, access and the order of construction.
- Specialist equipment
- Imaging equipment, sterilisers, lifts and rooftop plant bring heavy and sometimes vibration-sensitive loads. Their locations need to be known before floors are designed.
- Public accountability
- Councils and community organisations need documentation that stands up to procurement review and future maintenance by other consultants.
Engineering considerations
- Floor vibration
- Footfall vibration that goes unnoticed in an office can affect sensitive medical equipment. Floor stiffness and span are checked where equipment suppliers set vibration limits.
- Heavy equipment and plant
- Equipment weights, delivery routes and future replacement paths are designed into the slab and roof, including provision to remove and replace large items.
- Building class and robustness
- Health buildings fall under NCC building classes with specific fire resistance and egress requirements, which feed into member sizes and structural fire design.
- Condition of existing buildings
- Many community halls and older public buildings are timber or masonry with undocumented alterations. A structural assessment comes first when an extension, new roof or change of use is planned.
Questions we are asked
Can a clinic be extended while it stays open?
Usually, with staging. The engineer plans temporary works and the construction sequence with the builder so occupied areas stay structurally safe and separated from the works.
What does an engineer need to design a floor for medical imaging equipment?
The equipment supplier's weight, footprint, installation route and any vibration limits. These set slab thickness, stiffness and sometimes the location of the room within the building.
Does an old community hall need a structural assessment before renovation?
If the work changes loads, removes walls, replaces the roof or changes the use, yes. An assessment identifies deterioration and the capacity of the existing structure before new work is designed.
Sources
Have a project that needs engineering input?
Tell us what you are building or assessing, where it is and what drawings or reports you already have. We will come back with questions, a scope and a fee.
- Phone
- 1300 924 666
- Registered engineer
- Mustafa Koc, RPEQ 35981 (Civil)
